# Install fastfetch on Ubuntu, Debian and Linux Mint

> Ubuntu only added fastfetch to its own repositories in 25.04, and Debian in version 13, so on Ubuntu 22.04 and 24.04 and on Linux Mint 21 and 22 a plain apt install fails. Here is the method that works on each release, with the version you get. We tested each one in clean containers on 2026-11-02.

Canonical page: https://fastfetch.dev/install/ubuntu/ · Checked against fastfetch 2.71.0 · Updated 2026-11-06 · Independent guide, not affiliated with the fastfetch-cli project.

## Which method should you use?

| Your system | Best method | Version you get (2026-11-02) |
| --- | --- | --- |
| Ubuntu 22.04 LTS (jammy) | [.deb from GitHub](#deb) (the PPA is stuck at 2.66.0) | .deb 2.70.0 · PPA 2.66.0 |
| Ubuntu 24.04 LTS (noble) | [Official PPA](#ppa) | 2.70.0 |
| Ubuntu 25.04 (plucky) | PPA, or `apt` from Ubuntu | PPA 2.57.1 · Ubuntu 2.38.0 |
| Ubuntu 25.10 (questing) | PPA, or `apt` from Ubuntu | PPA 2.66.0 · Ubuntu 2.49.0 |
| Ubuntu 26.04 LTS (resolute) | [PPA](#ppa) for the latest, or `apt` | PPA 2.70.0 · Ubuntu 2.57.1 |
| Debian 13 (trixie) | `apt`, or the [.deb](#deb) for the latest | Debian 2.40.4 · .deb 2.70.0 |
| Debian 11 or 12 | [.deb from GitHub](#deb) | 2.70.0 |
| Debian testing / unstable | `apt` | 2.69.0 |
| Linux Mint 22.x (Ubuntu 24.04 base) | [PPA](#mint) or [.deb](#deb) | 2.70.0 · `apt` alone fails |
| Linux Mint 21.x (Ubuntu 22.04 base) | [.deb](#mint) (PPA stuck at 2.66.0) | .deb 2.70.0 · PPA 2.66.0 |
| LMDE 7 (Debian 13 base) | `apt`, or the .deb for the latest | 2.40.4 · .deb 2.70.0 |
| Kali Linux (rolling) | `apt` | 2.69.0 |

We installed fastfetch each of these ways in clean Ubuntu 22.04, 24.04 and 26.04 and Debian 12 and 13 containers on 2026-11-02; the versions above are what `fastfetch --version` reported ([results](/lab/#install)). Other PPA versions come from Launchpad's published sources for `ppa:zhangsongcui3371/fastfetch`; repository versions come from [Repology](https://repology.org/project/fastfetch/versions). Both were checked on 2026-11-02 and again on 2026-11-06, when 2.71.0 was released: by then no Debian-family repository and no PPA series had 2.71.0 yet, so the [.deb](#deb) from GitHub is the only way to get it right away.

#### fastfetch in Debian-family repositories

Packaged version vs the 2.71.0 release, 2026-11-06. Bar length = feature releases behind.

| Repository | Packaged version (minor versions behind 2.71.0) |
| --- | --- |
| Debian 14 (forky, testing) | 2.69.0 · 2 behind |
| Debian unstable | 2.69.0 · 2 behind |
| Kali rolling | 2.69.0 · 2 behind |
| Ubuntu 26.10 | 2.66.0 · 5 behind |
| Ubuntu 26.04 LTS | 2.57.1 · 14 behind |
| Ubuntu 25.10 | 2.49.0 · 22 behind |
| Debian 13 (trixie) | 2.40.4 · 31 behind |
| Raspberry Pi OS (stable) | 2.40.4 · 31 behind |
| Ubuntu 25.04 | 2.38.0 · 33 behind |

Source: [Repology](https://repology.org/project/fastfetch/versions)

## Ubuntu: install from the official PPA (recommended)

The fastfetch README points Ubuntu users to `ppa:zhangsongcui3371/fastfetch` ("Ubuntu 22.04 or newer; latest version"). It is published by fastfetch's maintainer, Carter Li.

*Ubuntu 24.04, 26.04*

```bash
sudo add-apt-repository ppa:zhangsongcui3371/fastfetch
sudo apt update
sudo apt install fastfetch
fastfetch --version
```

Future `sudo apt upgrade` runs keep it up to date. If `add-apt-repository` isn't found, install it first with `sudo apt install software-properties-common`.

**Ubuntu 22.04: the PPA only has 2.66.0**The README still says "Ubuntu 22.04 or newer", but every 22.04 (jammy) build of fastfetch 2.67.0 and later has failed on Launchpad. Since 2.67.0 fastfetch needs a C23 compiler (GCC 13+), and 22.04 ships GCC 11. When we added the PPA in a clean Ubuntu 22.04 container, `apt` installed **2.66.0**. For the current release on 22.04, use the [.deb from GitHub](#deb) instead.

On Linux Mint, Pop!\_OS, Zorin OS and other Ubuntu-based systems, the PPA works when it has a build for the Ubuntu release underneath. [Linux Mint](#mint) and [the others](#ubuntu-based) are covered below.

## Ubuntu 25.04+ and Debian 13+: from the distribution's repository

```bash
sudo apt install fastfetch
```

This is the simplest route, but the packaged version can be old. Debian 13 ships **2.40.4** from April 2025, thirty feature releases behind. That version predates several options shown on this site:

- the interactive `--gen-config` (2.67.0)
- `--structure-disabled` (2.58.0)
- `--logo-cache` (2.69.0)
- stable Lua format scripting

It also still accepts options that newer releases have since removed or renamed. If a command fails with "unknown option", compare `fastfetch --version` with the [release history](/releases/).

## Any Debian or Ubuntu: the .deb from GitHub

The README offers a `.deb` for "Ubuntu 20.04 or newer and Debian 11 or newer". Download `fastfetch-linux-amd64.deb` (or `fastfetch-linux-aarch64.deb` for ARM64) from the [latest release](https://github.com/fastfetch-cli/fastfetch/releases/latest), then install it with apt so dependencies are resolved:

```bash
sudo apt install ./fastfetch-linux-amd64.deb
```

A .deb installed this way is not updated automatically. Repeat the download for new releases, or use the PPA on Ubuntu.

## Linux Mint

Linux Mint uses Ubuntu's package repositories underneath, so it behaves like the Ubuntu release it's built on. That base decides which method works. We ran each method in clean Linux Mint 22.3 and 21.3 containers (`linuxmintd/mint22.3-amd64` and `mint21.3-amd64`):

| System | Method | Result | Notes |
| --- | --- | --- | --- |
| Linux Mint 22.3 | `apt install fastfetch` | ✗ `E: Unable to locate package fastfetch` | not in Mint's or Ubuntu 24.04's repositories |
| Linux Mint 22.3 | PPA | ✓ 2.70.0 | the PPA's Ubuntu 24.04 build |
| Linux Mint 22.3 | .deb from GitHub | ✓ 2.70.0 |  |
| Linux Mint 21.3 | `apt install fastfetch` | ✗ `E: Unable to locate package fastfetch` | not in Mint's or Ubuntu 22.04's repositories |
| Linux Mint 21.3 | PPA with Mint's `add-apt-repository` | ✓ 2.66.0 | no newer build for Ubuntu 22.04 |
| Linux Mint 21.3 | .deb from GitHub | ✓ 2.70.0 |  |

### Linux Mint 22.x (22, 22.1, 22.2, 22.3)

*Linux Mint 22.x*

```bash
sudo add-apt-repository ppa:zhangsongcui3371/fastfetch
sudo apt update
sudo apt install fastfetch
```

Mint 22 is built on Ubuntu 24.04, and the PPA's Ubuntu 24.04 build gave us **2.70.0**. On an installed Mint system, `add-apt-repository` is Mint's own tool (from the `mintsources` package) and handles PPAs. You can also add the PPA under *Software Sources → PPAs*. One caveat from our test: the Mint Docker image reports Ubuntu's codename instead of Mint's, which Mint's `add-apt-repository` rejects. So we added the PPA's source line by hand there, which is the same thing the tool does. If you prefer not to add a PPA, the [.deb](#deb) also installed 2.70.0.

### Linux Mint 21.x (21, 21.1, 21.2, 21.3)

```bash
sudo apt install ./fastfetch-linux-amd64.deb
```

Mint 21 is built on Ubuntu 22.04, which has the same problem as [Ubuntu 22.04](#jammy): the PPA stopped getting new builds for it at 2.66.0. With Mint's own `add-apt-repository` the PPA installed exactly that, **2.66.0**. Download `fastfetch-linux-amd64.deb` from the [latest release](https://github.com/fastfetch-cli/fastfetch/releases/latest) and install it as above; it gave us 2.70.0.

*fastfetch on Linux Mint 22.3 · real output*

```
                             ....              root@41fd79df9cfa
              .',:clooo:  .:looooo:.           -----------------
           .;looooooooc  .oooooooooo'          OS: Ubuntu 24.04.5 LTS (Noble Numbat) x86_64
        .;looooool:,''.  :ooooooooooc          Host: Virtual Machine (Hyper-V UEFI Release v4.1)
       ;looool;.         'oooooooooo,          Kernel: Linux 7.0.0-1017-azure
      ;clool'             .cooooooc.  ,,       Uptime: 57 seconds
         ...                ......  .:oo,      Packages: 1009 (dpkg)
  .;clol:,.                        .loooo'     Shell: bash 5.2.21
 :ooooooooo,                        'ooool     Display (Virtual-1): 1024x768
'ooooooooooo.                        loooo.    Theme: Yaru [GTK3]
'ooooooooool                         coooo.    Icons: Yaru [GTK3]
 ,loooooooc.                        .loooo.    Cursor: Adwaita
   .,;;;'.                          ;ooooc     CPU: INTEL(R) XEON(R) PLATINUM 8573C (4) @ 2.30 GHz
       ...                         ,ooool.     GPU: Mesa llvmpipe (LLVM 20.1.2, 256 bits)
    .cooooc.              ..',,'.  .cooo.      Memory: 1.23 GiB / 15.61 GiB (8%)
      ;ooooo:.           ;oooooooc.  :l.       Swap: 0 B / 3.00 GiB (0%)
       .coooooc,..      coooooooooo.           Disk (/): 60.73 GiB / 144.26 GiB (42%) - overlay
         .:ooooooolc:. .ooooooooooo'           Local IP (eth0): 172.17.0.2/16
           .':loooooo;  ,oooooooooc            Locale: en_US.UTF-8
               ..';::c'  .;loooo:'
```

### LMDE (Linux Mint Debian Edition)

LMDE is built on Debian, not Ubuntu, so the Ubuntu PPA doesn't apply. In our containers, **LMDE 7** (Debian 13 base) installed 2.40.4 with `sudo apt install fastfetch`. **LMDE 6** (Debian 12 base) printed `E: Unable to locate package fastfetch`. On both, the [.deb](#deb) gets you the current release.

## Kali Linux

```bash
sudo apt install fastfetch
```

Kali is a rolling release that follows Debian testing, so its package is recent. In a clean `kalilinux/kali-rolling` container this installed **2.69.0**, one release behind 2.70.0.

## Pop!\_OS, Zorin OS, elementary OS and KDE neon

These are built on Ubuntu, so use the row for their Ubuntu base in [the table above](#which). To see which base yours uses, run:

```bash
grep UBUNTU_CODENAME /etc/os-release
```

`noble` means Ubuntu 24.04: the PPA gives you 2.70.0. `jammy` means 22.04: use the .deb. For example, Zorin OS 17 is based on 22.04. Pop!\_OS 24.04, elementary OS 8 and current KDE neon are based on 24.04. We tested the Ubuntu bases themselves, not these distributions.

## Debian 13: no newer version in backports

Debian 13's 2.40.4 is old, and enabling `trixie-backports` doesn't help yet. In our test, with backports enabled, apt's candidate stayed `2.40.4+dfsg-1` from the main repository. For a newer version on Debian, use the [.deb](#deb).

## Raspberry Pi OS

Raspberry Pi OS (stable) shipped 2.40.4 on 2026-11-02, the same as Debian 13. For the latest release on a 64-bit Pi, use `fastfetch-linux-aarch64.deb` from the releases page.

## Fixing "Device XXXX" GPU names on Debian and Ubuntu

If your GPU shows as something like `XXXX Device XXXX (VGA compatible)`, your PCI ID database is older than your hardware. The README's fix is to download the current `pci.ids` from [pci-ids.ucw.cz](https://pci-ids.ucw.cz/v2.2/pci.ids) and overwrite `/usr/share/hwdata/pci.ids`. For AMD GPUs, also update `/usr/share/libdrm/amdgpu.ids`. Alternatively, ask the driver for the name:

*config.jsonc*

```jsonc
{
  "modules": [
    { "type": "gpu", "driverSpecific": true }
  ]
}
```

Older guides (and the README) show `--gpu-driver-specific` on the command line. Per-module flags were removed in 2.50.0, so that only works in the config file now.

## Uninstall

```bash
sudo apt remove fastfetch
```

To drop the PPA as well: `sudo add-apt-repository --remove ppa:zhangsongcui3371/fastfetch`. Your config in `~/.config/fastfetch/` is left alone.

## FAQ

### E: Unable to locate package fastfetch

Your release's repositories don't include it: Ubuntu before 25.04, or Debian before 13. Use the [PPA](#ppa) (Ubuntu) or the [.deb](#deb) (Debian).

### Is the PPA official?

It is the PPA the official README links for Ubuntu. The PPA owner's name, zhangsongcui3371, matches the address fastfetch maintainer Carter Li commits under in the project's history.

### Can I use snap or flatpak?

Neither is listed in the official README, so we don't recommend one. Use the PPA, apt or the .deb.

---

Contact: hello@fastfetch.dev · Official project: https://github.com/fastfetch-cli/fastfetch
